|
|
Modification of material flow of the manufacturing supplies
Hloušek, David ; Müller, Martin (referee) ; Kašpárek, Jaroslav (advisor)
The main content of this thesis is analysis and proposal of supplying between storages in company Hella Autotechnik Nova in Mohelnice. The main content of creation of this company is wide sort of front headlamps, rear and break lights, but also there is some sort of its washers for the most famous cars brands. Otherwise this thesis is about modification of basic layout, what can be seen there nowadays between external storage Meriva and logistic centre, what is located in main building of this company.
|
|
|
Waste flows modelling and assessment of their treatment
Kolátor, Matyáš ; Smejkalová, Veronika (referee) ; Pluskal, Jaroslav (advisor)
The thesis deals with the description, analysis and reconstruction of waste evidence. Nowadays, more and more emphasis is put on the issue of waste management and its efficient use. Legislation has set demanding targets for increased waste recovery and the development of a circular economy. In order to achieve these objectives, it is necessary to plan and organize the structure of waste management strategically. Important decisions in the field of waste management are based on data and the production and processing of waste. The quality of waste data has a major impact on the success of the process. The aim of this thesis is to describe the system of record, but also the possibilities of improving and reconstructing invalid data. The core of the work is the testing and improvement of a data reconciliation tool REVEDATO developed at the Institute of Process Engineering. The computational tool is based on the mathematical apparatus of data balancing, for which the correct definition of the weights is crucial, which will be the main subject of the work.
|
|
|
Material Flows and Environmental Impacts of s-WEEE in the Czech Republic
Polák, Miloš ; Hák, Tomáš (advisor) ; Kočí, Vladimír (referee) ; Vladík, Jaroslav (referee)
This thesis is a comprehensive study describing and quantifying material flows of waste electric and electronic equipment (WEEE) in the Czech Republic; specifically the material flow of small waste electric and electronic equipment (s-WEEE) as well as representative substances. The studied material flows were estimated regarding aspects of the environmental impact. The End-of-Life mobile phone is seen as a typical representative of s-WEEE ; therefore material flows of mobile phones are described in this thesis as well. To put it in concrete figures, approximately 124 thousand tons of WEEE from households originated in the Czech Republic in 2010, where each inhabitant got rid off 4 pieces of WEEE in average. Further, total production calculating also consumer-like WEEE from companies and institutions was around 141 thousand tons in 2010. S-WEEE present around 15% from the total amount of WEEE originating in 2010; however it is more than 80% as regards the number of pieces. Despite of that fact the recycling potential of Au for instance is slightly higher by s-WEEE than by large WEEE (63kg/year compared to the 59kg/year respectively). As regards estimation of the total production of EoL mobile phones, around 45 thousand pieces originated in the Czech Republic between the years 1990-2000 and 6,5...
|
|
| |
|
|
Material Flows and Environmental Impacts of s-WEEE in the Czech Republic
Polák, Miloš
This thesis is a comprehensive study describing and quantifying material flows of waste electric and electronic equipment (WEEE) in the Czech Republic; specifically the material flow of small waste electric and electronic equipment (s-WEEE) as well as representative substances. The studied material flows were estimated regarding aspects of the environmental impact. The End-of-Life mobile phone is seen as a typical representative of s-WEEE ; therefore material flows of mobile phones are described in this thesis as well. To put it in concrete figures, approximately 124 thousand tons of WEEE from households originated in the Czech Republic in 2010, where each inhabitant got rid off 4 pieces of WEEE in average. Further, total production calculating also consumer-like WEEE from companies and institutions was around 141 thousand tons in 2010. S-WEEE present around 15% from the total amount of WEEE originating in 2010; however it is more than 80% as regards the number of pieces. Despite of that fact the recycling potential of Au for instance is slightly higher by s-WEEE than by large WEEE (63kg/year compared to the 59kg/year respectively). As regards estimation of the total production of EoL mobile phones, around 45 thousand pieces originated in the Czech Republic between the years 1990-2000 and 6,5...
|
|
|
Material Flows and Environmental Impacts of s-WEEE in the Czech Republic
Polák, Miloš
This thesis is a comprehensive study describing and quantifying material flows of waste electric and electronic equipment (WEEE) in the Czech Republic; specifically the material flow of small waste electric and electronic equipment (s-WEEE) as well as representative substances. The studied material flows were estimated regarding aspects of the environmental impact. The End-of-Life mobile phone is seen as a typical representative of s-WEEE ; therefore material flows of mobile phones are described in this thesis as well. To put it in concrete figures, approximately 124 thousand tons of WEEE from households originated in the Czech Republic in 2010, where each inhabitant got rid off 4 pieces of WEEE in average. Further, total production calculating also consumer-like WEEE from companies and institutions was around 141 thousand tons in 2010. S-WEEE present around 15% from the total amount of WEEE originating in 2010; however it is more than 80% as regards the number of pieces. Despite of that fact the recycling potential of Au for instance is slightly higher by s-WEEE than by large WEEE (63kg/year compared to the 59kg/year respectively). As regards estimation of the total production of EoL mobile phones, around 45 thousand pieces originated in the Czech Republic between the years 1990-2000 and 6,5...
|
|
|
Material Flows and Environmental Impacts of s-WEEE in the Czech Republic
Polák, Miloš ; Hák, Tomáš (advisor) ; Kočí, Vladimír (referee) ; Vladík, Jaroslav (referee)
This thesis is a comprehensive study describing and quantifying material flows of waste electric and electronic equipment (WEEE) in the Czech Republic; specifically the material flow of small waste electric and electronic equipment (s-WEEE) as well as representative substances. The studied material flows were estimated regarding aspects of the environmental impact. The End-of-Life mobile phone is seen as a typical representative of s-WEEE ; therefore material flows of mobile phones are described in this thesis as well. To put it in concrete figures, approximately 124 thousand tons of WEEE from households originated in the Czech Republic in 2010, where each inhabitant got rid off 4 pieces of WEEE in average. Further, total production calculating also consumer-like WEEE from companies and institutions was around 141 thousand tons in 2010. S-WEEE present around 15% from the total amount of WEEE originating in 2010; however it is more than 80% as regards the number of pieces. Despite of that fact the recycling potential of Au for instance is slightly higher by s-WEEE than by large WEEE (63kg/year compared to the 59kg/year respectively). As regards estimation of the total production of EoL mobile phones, around 45 thousand pieces originated in the Czech Republic between the years 1990-2000 and 6,5...
|
|
|
Modification of material flow of the manufacturing supplies
Hloušek, David ; Müller, Martin (referee) ; Kašpárek, Jaroslav (advisor)
The main content of this thesis is analysis and proposal of supplying between storages in company Hella Autotechnik Nova in Mohelnice. The main content of creation of this company is wide sort of front headlamps, rear and break lights, but also there is some sort of its washers for the most famous cars brands. Otherwise this thesis is about modification of basic layout, what can be seen there nowadays between external storage Meriva and logistic centre, what is located in main building of this company.
|
|
|
Trends in the balance and material flows of phosphorus in the Czech Republic.
Hejzlar, Josef
In developed countries, many voices call for increasing the recycling of phosphorus (P) that is a strategic raw material for agriculture and other production sector; phosphorus is also causing environmental problems, for example. eutrophication. Using the methodology of material flow analysis, van Dijk et al. (Sci. Total Environ. 2016, 552: 1078-1093) quantified the main flows and stocks of P in 27 states of the European Union. The contribution presents and discusses data from that publication for the material flows P in the Czech Republic (CR) and compared with the EU. The P balance of CR shows the dependence on imported P through mineral fertilizers (1 kg/ca/yr), food and feed (1.5 kg/ca/yr) and also draws attention to significant environment losses and unused recycling potential. For example, municipal sludge (0.4 kg/ca/yr) and bone meal (0.25 kg/ca/yr) could replace 70% of the P amount in applied mineral fertilizers. P recycling rate in CR in comparison with EU-27 is below average (68% in livestock production, 21% in food production, 10% for human consumption). Agricultural production in CR still uses P reserves in the soil of mineral fertilizers in the past.
|
|
|
Logistics metal production analysis
CHOCHOLATÝ, Viktor
Material flow analysis is a main goal of the thesis. To analyse the flows of a material in a well-defined system under study. The goal is to get a transparent understanding of the material flows, to calculate indicators and to develop strategies and measures for improving the material flow systems. Material Flow Analysis thus is the basis for a material flow management.
|
guest ::
